Categories



ASTM standards

Aesteiron's Accreditation

Certificates

Steel Pipe Weight Calculator

Associate Manufacturers

Specialist in:


SS,CS,Alloy Steel Pipe Prices

Our Video

ASTM A530 / ASME SA530 / Specialized Carbon and Alloy Steel Pipe supplier & distributor in India

PIPE & TUBE ASTM STANDARDS

Our Associate manufacturers

ASTM A530/ASME SA530 

STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR SPECIALIZED CARBON AND ALLOY STEEL PIPE1 (ASTM A 530 / ASME SA 530 /ASTMA530/ASMESA530)

1. Scope


1.1 This specification2 covers a group fo requirements which, with the exceptions of Sections 4.3, 12, 19, and 20, are mandatory requirements to the ASTM pipe product specifications noted below unless the product specification specifies differnt requirements, in which case the requirement of the product specification shall prevail. 

1.2 Sections 4.3 or 6 are amndatory if the product specification has a requirement for product analysis or flattening tests. 

1.3 Section 20 is mandatory if the product specification has a hydrostatic test requirement without defing the test parameters.

1.4 Section 16 is for information only.

1.5 In case of confict between a requirement of the product specification and a reqirement of this general requirement specification, only the requirement of the of the product specification need be satisfied.

Title of Specification ASTM DesignationA
Seamless Carbon Steel Pipe for High-Temperature Service A106
Seamless and Welded Austentic Stainless Steel Pipe A312/A312M
Seamless and Welded Steel Pipe for Low-Temperature Service A333/A333M
Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service A335/A335M
Electric-Fusion-Welded Austenitic Chromium-Nickel Alloy Steel Pipe for high-Temperature Service A358/A358M
Carbon and Ferritic alloy Steel Forged and bored Pipe for High-Temperature Service A369/A369M
Seamless Austenitic Steel Pipe for Use With High-Temperature Central-Station Service A376/A376M
Metal-Arc-Welded Steel Pipe for Use With high-Pressure Transmission Systems A381
Seamless Ferritic Alloy-Steel pipe Specially Heat Treated for High-Temperature Service A405
Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service A409/A409M
Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service A426
Austenitic Steel Forged and Vored Pipe fot High-Temperature Service A430/A430M
Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service A451
Centrifugally Cast Austenitic Steel Cold-Wrought pipe for High-Temperature Service A452
Seamless Carbon Steel Pipe for Atmospheric and Lower TemperatureS A524
Centrnifugally Cast Iron-Chromium-Nickel high-Alloy Tubing for Pressure Application at High Temperatures A608
Centrifugally Cast Carbon Steel Pipe for High-Temperature Service A660
Electric-Fusion welded Steel Pipe for Atmospheric and Lower Temperatures A671
Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures A672
Carbon and Alloy Steel Pipe. Electric-Fusion-Welded for High-Pressure Service at High Temperatures A691
Seamless, Welded Ferritic. and Martensitic Stainless Steel Pipe A731/A731M
Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe A790/A790M
Single- or double-Welded Austenitic Stainless Steel Pipe A813/A813M
Cold-Worked Welded Austneitic Stainless Steel Pipe A814/A814M
Ecntrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments A872



AThese designations refer to the latest issue of the respective specifications.3 

1.6 The values stated in either inch-pound units of SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackert. the values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. 

Combinging values from the two systems may result in nonconformace with the specification. The inch-pound units shall apply unless the "M"designation(SI) fo the product specification is specified in the order. 


Note 1-The dimensionless designator NPS(nominal pipe size)has been substituted in this standard for suchtraditional terms as "nominal diameter," " size," and "nominal size." 

Our Associate manufacturers

Steel pipe & tube ready inventory: