Categories



ASTM standards

Aesteiron's Accreditation

Certificates

Steel Pipe Weight Calculator

Associate Manufacturers

Specialist in:


SS,CS,Alloy Steel Pipe Prices

Our Video

ASTM A214 / ASME SA214 / Electric Resistance Welded Carbon Steel Heat Exchanger and Condenser Tubes supplier & distributor in India

PIPE & TUBE ASTM STANDARDS

Our Associate manufacturers

ASTM A214M/ASME SA214 

ELECTRIC RESISTANCE WELDED CARBON STEEL HEAT EXCHANGER 
AND CONDENSER TUBES

(ASTM A 214 M / ASME SA 214 /ASTMA214M/ASMESA214) 

This standard is issued under the fixed designation A 214/A 214M; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon ( ¥å) indicates an editorial change since the last revision or reapproval. 

1.Scope

1.1 This specification covers minimum-wall-thickness, electric-resistance-welded, carbon steel tubes to be used for heat exchangers, condensers, and similar heat-transfer apparatus.

1.2 The tubing sizes usually furnished to this specification are to 3 in. [76.2 mm] i outside diameter, inclusive. Tubing having other dimensions may be furnished, provided such tubes comply wit all other requirements of this specification.

1.3 Mechanical property requirements do not apply to tubing smaller than 1/8 in. [3.2 mm] in inside diameter or 0.015 in. [0.4 mm] in thickness.

1.4 The purchaser shall specify in the order the outside diameter and minimum wall thickness. The inside diameter shall not be specified.

1.5 The values stated in either inch-pound units or SI units are to be regarded separately as standard. 

Within the each system are not exact equivalents; therefore, each system must be used independently of the other. 

Combining values from the two systems may result in nonconformance with the specification. 

The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.

Material Comparison Tables (ASTM ¡æKS, JIS, DIN, BS, NBN, NF, UNI) 

ASTM
STANDARD
UNS NO. KOREA/JAPANES GERMAN BRITISH BELGIAN FRENCH
KS/JIS Symbol KS/JIS Numbe Remarks DIN Type

DIN
Number

Materiral
Number
Remarks B.S
Number
B.S Grade NBN Type NBN Grade Remarks AFNOR Type NF Number
A 214 Electric Resistance Welded Heat Exchange and Condedser Tubes K01807 STBH 340 / STB 35 D3563 / G3461 (24) St 37-2 1626 1.0036 (3b)ERW Only 3606 ERW30 D37-1 629 (3b) TS34e A49-245
STBH 410 / STB 42 D3563 / G3461 (24)
STBH 510 / STB 52 D3563 / G3461 (24)

Our Associate manufacturers

Steel pipe & tube ready inventory: