API 5L Line Pipe



ASTM standards

Aesteiron's Accreditation

Certificates

Steel Pipe Weight Calculator

Associate Manufacturers

Specialist in:


SS,CS,Alloy Steel Pipe Prices

Our Video

API 5L A60 ERW Pipes View larger

API 5L A60 ERW Pipes

Other Trade name: api5l pipe| api5l-b |api5l X52 X60 X65| api5l psl2 | api5l grb PSL1 PSL2 Line Pipes

Calculate Your Pipe Weight
(It will open in new window)

Send Enquiry

More details

New

$1.25

$1.25 per KG

Add to wishlist

More info

A60

Steels for pipes
The specific chemical composition and strictly controlled manufacturing process are what make these steels so unique.

API 5L A60 ERW Pipes Properties

These grades are manufactured to the highest quality standards in order to meet the most stringent specifications. The reference standard is API 5L (American Petroleum Institute).

Special requirements such as HIC (hydrogen-induced cracking) resistance or high ductility at low temperature can be met to provide a solution for every pipeline project.

API 5L A60 ERW Pipes Advantages

ArcelorMittal's steels for pipes have very high tensile strength and excellent toughness at very low temperatures and in heavy gauges. In addition, their special chemical composition with a particularly low carbon equivalent value gives them good weldability. The consistent mechanical properties of these steels improves their forming and welding performance.

API 5L A60 ERW Pipes Applications

 ArcelorMittal's steels for pipes are particularly suitable for manufacturing:

  • Straight ERW pipes of up to 26” diameter
  • Spiral SAW pipes

Spiral SAW and straight ERW pipes made with this type of steel are a good alternative to UOE pipes (made from plate from quarto roll mills) or seamless pipes.

These steels are used for the production of pipes for the transport of gaseous or liquid materials such as water or oil.

API 5L A60 ERW Pipes Weldability

The chemical composition of these steels ensures that there is no risk of cold cracking and simply applying the normal welding rules is sufficient to achieve a good quality weld. For SAW welding, the choice of an SA1 AM FCE flux/wire combination for grades up to X46 AM FCE, and an SA2 AM FCE for higher grades, should produce a weld with a coefficient greater than 1 and a good degree of toughness at the centre of the weld.

API 5L A60 ERW Pipes Brand correspondence

  API 5L:2008 EN 10208-2:2009
Grade B AM FCE Grade B L245MB
X42 AM FCE X42 L290MB
X46 AM FCE X46 -
X52 AM FCE X52 L360MB
X56 AM FCE X56 -
X60 AM FCE X60 L415MB
X65 AM FCE X65 L450MB
X70 AM FCE X70 L485MB
X80 AM FCE X80 L555MB

API 5L A60 ERW Pipes Dimensions

API standard

Thickness (mm) Grade B AM FCE, X42 AM FCE X46 AM FCE, X56 AM FCE X52 AM FCE X60 AM FCE X65 AM FCE, X70 AM FCE X80 AM FCE
Min width Max width Min width Max width Min width Max width Min width Max width Min width Max width Min width Max width
5.00 ≤ th < 5.50 600 2135 600 2100 600 2135 600 2100 600 2100 1000 1785
5.50 ≤ th < 6.00 1835
6.00 ≤ th < 6.50 2135 1985
6.50 ≤ th < 13.50 2135 2135
13.50 ≤ th < 15.00 2100
15.00 ≤ th < 15.25 800 800 800 1000 1000
15.25 ≤ th < 17.50 2100
17.50 ≤ th < 18.00 2100
18.00 ≤ th < 18.25 1400
18.25 ≤ th < 20.00 2100

For thicknesses over 20 mm, please contact us.

HIC-resistant

Since the dimensions available are constantly changing, please contact us for specific information.

API 5L A60 ERW Pipes Mechanical properties

 
Direction
Thickness (mm)
Re (MPa)
Rm (MPa)
A50 (%)
KV 0°C (J)
Re/Rm
DWTT 10°C (%)
Grade B AM FCE T 5 - 25 245 - 440 415 - 520 ≥ 22 ≥ 40 0.85 ≥ 100
X42 AM FCE T 5 - 25 290 - 495 415 - 585 ≥ 21 ≥ 40 0.85 ≥ 100
X46 AM FCE T 5 - 25 320 - 525 435 - 620 ≥ 21 ≥ 40 0.85 ≥ 100
X52 AM FCE T 5 - 25 360 - 510 460 - 600 ≥ 20 ≥ 40 0.85 ≥ 85
X56 AM FCE T 5 - 25 390 - 545 490 - 645 ≥ 20 ≥ 40 0.85 ≥ 85
X60 AM FCE T 5 - 25 415 - 565 520 - 665 ≥ 18 ≥ 40 0.85 ≥ 85
X65 AM FCE T 5 - 25 450 - 570 535 - 655 ≥ 18 ≥ 40 0.87 ≥ 85
X70 AM FCE T 5 - 25 485 - 605 570 - 675 ≥ 18 ≥ 40 0.90 ≥ 85
X80 AM FCE T 5 - 25 555 - 675 625 - 750 ≥ 18 ≥ 40 0.90 ≥ 85

The mechanical properties of the pipes will depend on:

  • The Bauschinger effect, which in turn depends on
    • The grade and chemical composition of the steel
    • The type of pipe (ERW or SAW)
    • The type of pipe manufacturing line
  • The post-treatment (full body post-heating/stress relieving post-heating) that is sometimes performed by the client
  • The angle of the weld on spiral tubes (this will influence the direction of the tensile test with respect to the rolling direction)

The evolution of the mechanical properties - and in particular of the difference in yield strength between the sheet and the pipe - is specific for each process. It is therefore very important to indicate both the forming and the welding process as well as the aforementioned sheet/pipe difference. An agreement between ArcelorMittal and the client on the coil mechanical properties to be guaranteed must be reached prior to delivery of the coils.

The mechanical properties listed above are those of the pipes.

The minimum elongation given above refers to a 610 mm diameter pipe with a wall thickness of 12.7 mm.

API 5L A60 ERW Pipes Chemical composition

  Notes
C (%)
Mn (%)
P (%)
S (%)
Si (%)
Al (%)
Cu (%)
Cr (%)
Ni (%)
Mo (%)
Nb (%)
V (%)
Ti (%)
N (%)
Ceq (%)
Grade B AM FCE 1+2 ≤ 0.220 ≤ 1.20 ≤ 0.025 ≤ 0.015 ≤ 0.45 0.015 - 0.060 ≤ 0.25 ≤ 0.30 ≤ 0.30 ≤ 0.10 ≤ 0.050 ≤ 0.050 ≤ 0.040 ≤ 0.012 ≤ 0.40
X42 AM FCE 1+2 ≤ 0.220 ≤ 1.30 ≤ 0.025 ≤ 0.015 ≤ 0.45 0.015 - 0.060 ≤ 0.25 ≤ 0.30 ≤ 0.30 ≤ 0.10 ≤ 0.050 ≤ 0.050 ≤ 0.040 ≤ 0.012 ≤ 0.40
X46 AM FCE 1+2 ≤ 0.220 ≤ 1.40 ≤ 0.025 ≤ 0.015 ≤ 0.45 0.015 - 0.060 ≤ 0.25 ≤ 0.30 ≤ 0.30 ≤ 0.10 ≤ 0.050 ≤ 0.050 ≤ 0.040 ≤ 0.012 ≤ 0.40
X52 AM FCE 1+2 ≤ 0.220 ≤ 1.40 ≤ 0.025 ≤ 0.015 ≤ 0.45 0.015 - 0.060 ≤ 0.25 ≤ 0.30 ≤ 0.30 ≤ 0.10 - - - ≤ 0.012 ≤ 0.41
X56 AM FCE 1+2 ≤ 0.220 ≤ 1.40 ≤ 0.025 ≤ 0.015 ≤ 0.45 0.015 - 0.060 ≤ 0.25 ≤ 0.30 ≤ 0.30 ≤ 0.10 - - - ≤ 0.012 ≤ 0.43
X60 AM FCE 1+2+3 ≤ 0.220 ≤ 1.40 ≤ 0.025 ≤ 0.015 ≤ 0.45 0.015 - 0.060 ≤ 0.25 ≤ 0.30 ≤ 0.30 ≤ 0.10 - - - ≤ 0.012 ≤ 0.42
X65 AM FCE 1+2+3 ≤ 0.220 ≤ 1.45 ≤ 0.025 ≤ 0.015 ≤ 0.45 0.015 - 0.060 ≤ 0.25 ≤ 0.30 ≤ 0.30 ≤ 0.10 - - - ≤ 0.012 ≤ 0.43
X70 AM FCE 1+2+3 ≤ 0.220 ≤ 1.65 ≤ 0.025 ≤ 0.015 ≤ 0.45 0.015 - 0.060 ≤ 0.25 ≤ 0.30 ≤ 0.30 ≤ 0.10 - - - ≤ 0.012 ≤ 0.43
X80 AM FCE 1+2+3 ≤ 0.220 ≤ 1.85 ≤ 0.025 ≤ 0.015 ≤ 0.45 0.015 - 0.060 ≤ 0.25 ≤ 0.30 ≤ 0.30 ≤ 0.10 - - - ≤ 0.012 ≤ 0.43
1. A ratio Al/N ≥ 2 shall be applied.
2. The sum of the percentages by mass of the three elements niobium, titanium and vanadium shall not exceed 0.15%.
3. For these steel grades, a molybdenum content of up to 0.35% can be agreed.

Source: ArcelorMittal

API 5L A60 ERW Pipes related line pipe materials stock:

We also stock other steel line pipe grades, please check the list of steel grades below:


Send Quick Enquiry:

India's Largest Stockist & Dealers of api5l gr b & api5l seamless pipe

Looking for API 5L A60 ERW Pipes? First time in India selling steel Pipe & API 5L A60 ERW Pipes online at lowest price with all shipping documents, supplying API 5L A60 ERW Pipes with mill certificate, all size & grades seamless pipes is in ready stock, Hot offer - flat 6% off on API 5L A60 ERW Pipes

 

Reviews

No customer comments for the moment.

Write a review

API 5L A60 ERW Pipes

API 5L A60 ERW Pipes

Other Trade name: api5l pipe| api5l-b |api5l X52 X60 X65| api5l psl2 | api5l grb PSL1 PSL2 Line Pipes

Calculate Your Pipe Weight
(It will open in new window)

Send Enquiry

Write a review

Summary

  • Product Name:API 5L A60 ERW Pipes
  • Price: $ 1.25
  • Product Width: 0.00 cm
  • Product Height: 0.00 cm
  • Product Depth: 0.00 cm
  • Product Weight: 0.00 kg
  • Description: Other Trade name: api5l pipe| api5l-b |api5l X52 X60 X65| api5l psl2 | api5l grb PSL1 PSL2 Line Pipes Calculate Your Pipe Weight (It will open in new window) Send Enquiry
Path: > > > API 5L A60 ERW Pipes

18 other products in the same category: